One great advantage of using Hopin for your events is that you can switch from live videos to pre-recorded videos across the major video segments of Hopin: Stage, Sessions or Expo. This guide will show you how to do that on the Stage.
You're able to switch from a live feed to a pre-recorded video (and vice versa) through the event dashboard anytime during the event.
To do that, go to the Stage tab of the event dashboard (Venue > Stage). Under stream provider, select 'Hopin' to stream a live video from your camera; select 'Youtube', 'Vimeo' or 'Wistia' to stream a video from any of those platforms onto the Stage at any time. Click save at the bottom of the page.
The other way would be to do a screenshare while doing a live presentation. With this, attendees are not required to hit play as the presenter is the one that controls when the video starts and stops.
To screenshare with audio you must select to share a Chrome Tab on both Mac and PC, or the entire screen on PC only.
- Open the video in a dedicated Chrome tab and click on the screenshare icon. On the popup window, click on Chrome Tab and select the tab with the video. Be sure to check the share audio box so the attendees can hear the audio. If you share the entire screen on PC, you will find the share audio box in the same bottom-left corner.
- Click share to start sharing.
You can also use a third party application for your attendees to be able to hear the audio clearly. You may click here to view our support article on sharing audio for more information.
Stream from a third-party source - which supports streaming both live and pre-recorded content - onto the Stage using RTMP.
Feel free to reach out to us firstname.lastname@example.org in case you have questions or need assistance.